[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (141-160)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Test your preparation for Amazon AWS-DevOps-Engineer-Professional with these actual AWS-DevOps-Engineer-Professional new questions below. Exam questions are a sure method to validate one’s preparation for actual certification exam.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 141
Which is not a restriction on AWS EBS Snapshots?

A.    Snapshots which are shared cannot be used as a basis for other snapshots.
B.    You cannot share a snapshot containing an AWS Access Key ID or AWS Secret Access Key.
C.    You cannot share unencrypted snapshots.
D.    Snapshot restorations are restricted to the region in which the snapshots are created.

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (121-140)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Lead2pass is constantly updating AWS-DevOps-Engineer-Professional exam dumps. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easily prepare for AWS-DevOps-Engineer-Professional exam and successfully pass your exam. You just need to spend 20-30 hours on studying the exam dumps.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 121
Your CTO thinks your AWS account was hacked. What is the only way to know for certain if there was unauthorized access and what they did, assuming your hackers are very sophisticated AWS engineers and doing everything they can to cover their tracks?

A.    Use CloudTrail Log File Integrity Validation.A
B.    Use AWS Config SNS Subscriptions and process events in real time.
C.    Use CloudTrail backed up to AWS S3 and Glacier.
D.    Use AWS Config Timeline forensics.

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (101-120)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

In recent years, many people choose to take Amazon AWS-DevOps-Engineer-Professional certification exam which can make you get the Amazon certificate and that is the passport to get a better job and get promotions. How to prepare for Amazon AWS-DevOps-Engineer-Professional exam and get the certificate? Please refer to Amazon AWS-DevOps-Engineer-Professional exam questions and answers on Lead2pass.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 101
What is the maximum supported single-volume throughput on EBS?

A.    320MiB/s
B.    160MiB/s
C.    40MiB/s
D.    640MiB/s

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (81-100)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Our PDF dumps of AWS-DevOps-Engineer-Professional exam is designed to ensure everything which you need to pass your exam successfully. At Lead2pass, we have a completely customer oriented policy. We invite the professionals who have rich experience and expert knowledge of the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 81
For AWS Auto Scaling, what is the first transition state an instance enters after leaving steady state when scaling in due to health check failure or decreased load?

A.    Terminating
B.    Detaching
C.    Terminating:Wait
D.    EnteringStandby

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (61-80)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Good news, Lead2pass has updated the AWS-DevOps-Engineer-Professional exam dumps. With all the questions and answers in your hands, you will pass the Amazon AWS-DevOps-Engineer-Professional exam easily.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 61
You have been asked to use your departments existing continuous Integration (CI) tool to test a three-tier web architecture defined In an AWS CloudFormation template.
The tool already supports AWS APIs and can launch new AWS CloudFormation stacks after polling version control.
The CI tool reports on the success of the AWS CloudFormation stack creation by using the Describe Stacks API to look for the CREATE COMPLETE status.
The architecture tiers defined in the template consist of:

– One load balancer
– Five Amazon EC2 instances running the web application
– One multi-AZ Amazon ROS instance

How would you implement this? Choose 2 answers

A.    Define a WaitCondition and a WaitConditionHandle for the output of a UserData command that does sanity checking of the application’s post-install state.
B.    Define a CustomResource and write a script that runs architecture-level Integration tests through the load balancer to the application and database for the state of multiple tiers.
C.    Define a WaitCondition and use a WaitConditionHandle that leverages the AWS SDK to run the DescribeStacks API call until the CREATE COMPLETE status is returned.
D.    Define a CustomResource that leverages the AWS SDK to run the DescribeStacks API call until the ‘CREATE COMPLETE status is returned.
E.    Define a UserDataHandle for the output of a UserData command that does sanity checking of the application’s post-install state and runs integration tests on the state of multiple tiers through the load balancer to the application.
F.    Define a UserDataHandle for the output of a CustomResource that does sanity checking of the application’s post-install state.

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (41-60)

Lead2pass 2017 September New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Pass AWS-DevOps-Engineer-Professional exam with the latest Lead2pass AWS-DevOps-Engineer-Professional dumps: Lead2pass AWS-DevOps-Engineer-Professional exam questions and answers in PDF are prepared by our experts. Moreover, they are based on the recommended syllabus that covering all the AWS-DevOps-Engineer-Professional exam objectives.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 41
Your company currently runs a large multi-tier web application. One component is an API service that all other components of your application rely on to perform read/write operations.
This service must have high availability and zero downtime during deployments.
Which technique should you use to provide cost-effective, zero-downtime deployments for this component?

A.    Use an AWS CloudFormation template to re-deploy your application behind a load balancer, and launch a new AWS CloudFormation stack during each deployment.
Update your load balancer to send traffic to the new stack, and then deploy your software. Leave your old stacks running, and tag their resources with the version for rollback.
B.    Re-deploy your application on Elastic Beanstalk. During deployment, create a new version of your application, and create a new environment running that version in Elastic BeanStalk. Finally, take advantage of the Elastic Beanstalk Swap CNAME operation to switch to the new environment.
C.    Re-deploy your application behind a load balancer that uses Auto Scaling groups. Create a new identical Auto Scaling group and associate it to your Amazon Route53 zone.
Configure Amazon Route53 to auto- weight traffic over to the new Auto Scaling group when all instances are marked as healthy.
D.    Re-deploy your application behind a load balancer using an AWS OpsWorks stack and use AWS OpsWorks stack versioning, during deployment create a new version of your application, tell AWS OpsWorks to launch the new version behind your load balancer, and when the new version is launched, terminate the old AWS OpsWorks stack.

» Read more

[2017 PDF&VCE] Lead2pass New Updated AWS-DevOps-Engineer-Professional Braindump Free Get (21-40)

Lead2pass 2017 August New Amazon AWS-DevOps-Engineer-Professional Exam Dumps!

100% Free Download! 100% Pass Guaranteed!

Lead2pass provides 100% pass AWS-DevOps-Engineer-Professional exam questions and answers for your Amazon AWS-DevOps-Engineer-Professional exam. We provide Amazon AWS-DevOps-Engineer-Professional exam questions from Lead2pass dumps and answers for the training of AWS-DevOps-Engineer-Professional practice test.

Following questions and answers are all new published by Amazon Official Exam Center: https://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 21
Your development team wants account-level access to production instances in order to do live debugging of a highly secure environment.
Which of the following should you do?

A.    Place the credentials provided by Amazon Elastic Compute Cloud (EC2) into a secure Amazon Sample Storage Service (S3) bucket with encryption enabled.
Assign AWS Identity and Access Management (IAM) users to each developer so they can download the credentials file.
B.    Place an internally created private key into a secure S3 bucket with server-side encryption using customer keys and configuration management, create a service account on all the instances using this private key, and assign IAM users to each developer so they can download the file.
C.    Place each developer’s own public key into a private S3 bucket, use instance profiles and configuration management to create a user account for each developer on all instances, and place the user’s public keys into the appropriate account.
D.    Place the credentials provided by Amazon EC2 onto an MFA encrypted USB drive, and physically share it with each developer so that the private key never leaves the office.

» Read more

[Full Version] 2017 New AWS-DevOps-Engineer-Professional Exam PDF Ensure AWS-DevOps-Engineer-Professional Certification Exam Pass 100% (1-20)

2017 February Amazon Official New Released AWS-DevOps-Engineer-Professional Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

This dump is valid to pass Amazon AWS-DevOps-Engineer-Professional and don’t just memorize the answer, you need to get through understanding of it because the question changed a little in the real exam. The material is to supplement your studies.

Following questions and answers are all new published by Amazon Official Exam Center: http://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 1
Due to compliance regulations, management has asked you to provide a system that allows for cost-effective long-term storage of your application logs and provides a way for support staff to view the logs more quickly. Currently your log system archives logs automatically to Amazon S3 every hour, and support staff must wait for these logs to appear in Amazon S3, because they do not currently have access to the systems to view live logs.
What method should you use to become compliant while also providing a faster way for support staff to have access to logs?

A.    Update Amazon S3 lifecycle policies to archive old logs to Amazon Glacier, and add a new policy to push all log entries to Amazon SQS for ingestion by the support team.
B.    B. Update Amazon S3 lifecycle policies to archive old logs to Amazon Glacier, and use or write a service to also stream your application logs to CloudWatch Logs.
C.    Update Amazon Glacier lifecycle policies to pull new logs from Amazon S3, and in the Amazon EC2 console, enable the CloudWatch Logs Agent on all of your application servers.
D.    Update Amazon S3 lifecycle policies to archive old logs to Amazon Glacier. key can be different from the tableEnable Amazon S3 partial uploads on your Amazon S3 bucket, and trigger an Amazon SNS notification when a partial upload occurs.
E.    Use or write a service to stream your application logs to CloudWatch Logs. Use an Amazon Elastic Map Reduce cluster to live stream your logs from CloudWatch Logs for ingestion by the support team, and create a Hadoop job to push the logs to S3 in five-minute chunks.

» Read more

[Full Version] Lead2pass Amazon AWS-DevOps-Engineer-Professional VCE And PDF Instant Download

2017 January Amazon Official New Released AWS-DevOps-Engineer-Professional Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Are you worrying about the AWS-DevOps-Engineer-Professional exam? Lead2pass provides the latest AWS-DevOps-Engineer-Professional braindumps and guarantees you passing AWS-DevOps-Engineer-Professional exam beyond any doubt.

Following questions and answers are all new published by Amazon Official Exam Center: http://www.lead2pass.com/aws-devops-engineer-professional.html

QUESTION 1
You need your CI to build AMIs with code pre-installed on the images on every new code push. You need to do this as cheaply as possible. How do you do this?

A.    Bid on spot instances just above the asking price as soon as new commits come in, perform all instance configuration and setup, then create an AMI based on the spot instance.
B.    Have the CI launch a new on-demand EC2 instance when new commits come in, perform all instance configuration and setup, then create an AMI based on the on-demand instance.
C.    Purchase a Light Utilization Reserved Instance to save money on the continuous integration machine.
Use these credits whenever your create AMIs on instances.
D.    When the CI instance receives commits, attach a new EBS volume to the CI machine. Perform all setup on this EBS volume so you don’t need a new EC2 instance to create the AMI.

» Read more