[May 2018] 100% Free Lead2pass 352-001 New Questions Download 510q

100% New Updated 352-001 New Questions Lead2pass Helps Pass 352-001 Exam Successfully:

https://www.lead2pass.com/352-001.html

QUESTION 31
Refer to the exhibit. Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why? » Read more

[May 2018] 300-365 Exam Questions Free Download From Lead2pass 71q

Best Lead2pass Cisco 300-365 PDF Dumps With New Update Exam Questions:

https://www.lead2pass.com/300-365.html

QUESTION 31
Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?

A.    show ap config general Cisco_AP
B.    show wlan wlan_id
C.    show flexconnect summary
D.    show flexconnect group detail » Read more

[May 2018] Lead2pass 300-360 New Questions Free Download 147q

Lead2pass Cisco 300-360 VCE And PDF Instant Download:

https://www.lead2pass.com/300-360.html

QUESTION 31
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. What does this indicate about the signal strength?

A.    The area is below the minimum threshold configured on the tool.
B.    The area is below the detectable level and indicates no RF signal.
C.    The area is below -100 dBm at coverage cell edge.
D.    The area is below -67 dBm at coverage cell edge. » Read more

[May 2018] Lead2pass Latest Cisco 300-320 Exam Questions Free Downloading 558q

Lead2pass 300-320 Dumps PDF Free Download:

https://www.lead2pass.com/300-320.html

QUESTION 31
What network technology provides Layer 2 high availability between the access and distribution layers?

A.    HSRP
B.    MEC
C.    EIGRP
D.    GLBP » Read more

[May 2018] Lead2pass 100% Valid 300-210 Exam Questions PDF Free Download 383q

Lead2pass 2018 100% Real 300-210 Exam Questions:

https://www.lead2pass.com/300-210.html

QUESTION 51
Which IPS signature regular expression CLI command matches a host issuing a domain lookup for www.theblock.com?

A.    regex-string (\x03[Tt][Hh][Ee]\x05[Bb][Ll][Oo][Cc][Kk])
B.    regex-string (\x0b[theblock.com])
C.    regex-string (\x03[the]\x05[block]0x3[com])
D.    regex-string (\x03[T][H][E]\x05[B][L][O][C][K]\x03[.][C][O][M] » Read more

[May 2018] Free Share 300-209 PDF Dumps With Lead2pass Updated Exam Questions 319q

Free Share Lead2pass Cisco 300-209 VCE Dumps With New Update Exam Questions:

https://www.lead2pass.com/300-209.html

QUESTION 31
A Cisco IOS SSL VPN gateway is configured to operate in clientless mode so that users can access file shares on a Microsoft Windows 2003 server. Which protocol is used between the Cisco IOS router and the Windows server?

A.    HTTPS
B.    NetBIOS
C.    CIFS
D.    HTTP

» Read more

[May 2018] Free Lead2pass Cisco 300-208 PDF Dumps With The Latest Update Exam Questions 365q

Free Lead2pass Cisco 300-208 PDF Exam Questions And Answers Download:

https://www.lead2pass.com/300-208.html

QUESTION 31
Which three components comprise the Cisco ISE profiler? (Choose three.)

A.    the sensor, which contains one or more probes
B.    the probe manager
C.    a monitoring tool that connects to the Cisco ISE
D.    the trigger, which activates ACLs
E.    an analyzer, which uses configured policies to evaluate endpoints
F.    a remitter tool, which fails over to redundant profilers

» Read more

[May 2018] Lead2pass Exam Collection 300-206 Dumps And 300-206 New Questions 315q

Lead2pass Free 300-206 Exam Dumps With PDF And VCE Download:

https://www.lead2pass.com/300-206.html

QUESTION 31
Where in the Cisco ASA appliance CLI are Active/Active Failover configuration parameters configured?

A.    admin context
B.    customer context
C.    system execution space
D.    within the system execution space and admin context
E.    within each customer context and admin context » Read more

[May 2018] Best Lead2pass Cisco 300-180 PDF Dumps With New Update Exam Questions 374q

Download Free Cisco 300-180 Exam Questions And Answers From Lead2pass:

https://www.lead2pass.com/300-180.html

QUESTION 81
For a KVM session to be successful, which two of these need to be done? (Choose two.)

A.    The Cisco IMC IP address needs to be assigned on the Admin tab.
B.    The Cisco IMC IP address needs to be in the same subnet as the management IP.
C.    The Cisco IMC needs to be upgraded to the same version as the UCS Manager.
D.    The server needs to be fully discovered.

Answer: AD s

QUESTION 82s
A customer is configuring SAN pin groups in a Cisco UCS domain.
The customer notices that pinning is not working and traffic from the vHBA is not passing over the Fibre Channel uplink port. Which of these must be done for pinning to work correctly?

A.    Include the SAN pin group in a vHBA policy and then include the vHBA policy in the service profile
that is assigned to that server.
B.    Include the SAN policy in the Cisco UCS Manager to match with pin groups on the fabric interconnect.
C.    The customer must have Cisco UCS Manager version 2.0 or above.
D.    Fibre Channel switch mode needs to be configured first.

Answer: A

QUESTION 83
Refer to exhibit. A Cisco UCS admin is troubleshooting an issue with a vNIC not coming up on a blade. When looking at the CLI of the “Fabric Interconnect”,the admin runs this command to view the status of the interface.
Which option describes a possible reason why the interface is stuck in an “initializing” state?

831

A.    The service profile is not applied to a blade.
B.    The VLANs defined on the vNIC are not defined on a matching uplink port.
C.    The uplink port is down.
D.    The QoS policy on the vNIC is invalid.
E.    The MTU on the vNIC is higher than the MTU configured in the QoS system class.

Answer: C

QUESTION 84
Which two options are causes for failure of a Cisco C-Series server that is configured to boot from SAN? (Choose two.)

A.    The boot LUN ID is not 0.
B.    The ISCSI target is only available via one via one path through the network.
C.    C-Series does not support boot from SAN.
D.    The KVM dongle is attached to the front of the server with a USB stick installed.
E.    Under the FCoE properties on the vNIC adapter, the FCoE VLAN ID is set to 10.
F.    The boot table for fc0 has not been configured.

Answer: DF

QUESTION 85
Which command on the Fabric Interconnect displays packet statistics for a given QoS group and MTU size?

A.    show policy-map interface ethernet x/y
B.    show queuing interface ethernet x/y
C.    show interface ethernet x/y
D.    show class-map type qos
E.    show interface queuing ethernet x/y

Answer: B

QUESTION 86
A Cisco UCS admin is trying to integrate Cisco UCS Manager with Active Directory Authentication. After the configuration is done, the admin is still unable to log in using LDAP credentials. When running a debug on the Fabric Interconnect, this error is displayed:

ldap_build_roles_and_locales_from_attr: No attr for usr profile

Which step was missed in the configuration?

A.    The LDAP provider was not configured correctly.
B.    The proper RBAC role(s) were not assigned to the user.
C.    Cisco UCS Manager 2.1 is required for LDAP integration.
D.    The “Attribute” field in Cisco UCS was left blank.

Answer: B

QUESTION 87
Which three requirements are needed to configure a blade to boot successfully from Fibre Channel? (Choose three.)

A.    zoning
B.    LUN masking
C.    WWPN device alias
D.    boot from SAN policy
E.    SAN connectivity policy
F.    port assignment
G.    target WWPN needs to be set in the boot from SAN policy

Answer: ABD

QUESTION 88
Which description of a core file is true?

A.    It is generated by a system failure.
B.    It is generated by a process failure.
C.    It is generated by a component failure.
D.    It is generated by a hardware failure.

Answer: B

QUESTION 89
Which logs are used to troubleshoot hardware failure?

A.    system event log
B.    audit log
C.    accounting log
D.    gateway logs
E.    system log

Answer: A

QUESTION 90
A UCS Admin is trying to launch the KVM console but it is failing to launch. All IP Pools for mgmt are configured and the CIMC has an address in UCSM. They SSH to the fabric Interconnect and run an ethanalyzer while issuing a ping from their local PC to the KVM IP address. The ping is successful but they do not see the ICMP requests and replies displayed in the capture. Here is the filter they used:

FIA(nxos)# ethanalyzer local interface mgmt display-filter icmp limit-captured-frames 0

What could be the reason pings are not seen in the capture and the KVM is failing to load?

A.    Java settings are preventing the KVM from loading
B.    There is a duplicate IP address for that CIMC address
C.    The switch upstream from the FI has the wrong vlan configured
D.    The CIMC IP pool is in the same subnet as the Fabric Interconnects mgmt 0 interface

Answer: B

300-180 dumps full version (PDF&VCE): https://www.lead2pass.com/300-180.html

Large amount of free 300-180 exam questions on Google Drive: https://drive.google.com/open?id=108Bd0NBc2wWwiFC-bUg8eLE5zS0n9gVN

You may also need:

300-165 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDSkhBVngxX0Z3Y0k

300-170 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDdHhmcTBIbGM4bmc

300-175 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDVDYyRldqb1AzenM

[May 2018] 2018 New Released Cisco 300-175 Exam Dumps Free Download In Lead2pass 294q

2018 Updated Lead2pass Cisco 300-175 Exam Questions:

https://www.lead2pass.com/300-175.html

QUESTION 31
How many links are there between a second-generation IOM (Cisco UCS 2204 or 2208) and a third- generation half-width blade (Cisco UCS B200 M3 or B22 M3) in a Cisco UCS system?

A.    1
B.    2
C.    4
D.    8 » Read more

1 2 3 4 132