[2017 New] Pass 200-150 Exam By Training Lead2pass New VCE And PDF Dumps (76-89)

2017 July Cisco Official New Released 200-150 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

In recent years, many people choose to take Cisco 200-150 certification exam which can make you get the Cisco certificate and that is the passport to get a better job and get promotions. How to prepare for Cisco 200-150 exam and get the certificate? Please refer to Cisco 200-150 exam questions and answers on Lead2pass.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/200-150.html

Which two network topologies are the most popular in switching? (Choose two.)

A.    Bus
B.    Token passing bus
C.    Star
D.    Extended star
E.    Ring

Answer: CD

Which two VTP modes allow the creation of local VLANs? (Choose two.)

A.    transparent
B.    native
C.    server
D.    client
E.    on

Answer: AC

Which three terms are used to describe data at Layers 1, 2, and 4 of the OSI model? (Choose three.)

A.    PDUs
B.    Bits
C.    Sequences
D.    Segments
E.    Packets
F.    Frames

Answer: BDF
Bits -1 layer
Frames – 2 layer
Segments – 4 layer

What are two attributes of a VLAN? (Choose two.)

A.    A VLAN defines a collision domain.
B.    A VLAN defines a broadcast domain.
C.    Broadcasts are flooded to all VLANs.
D.    Collisions are flooded to all VLANs.
E.    A Layer 3 device is required to route packets between VLANs.
F.    A Layer 2 device is required to route packets between VLANs.

Answer: BE
“In computer networking, a single layer-2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them via one or more routers; such a domain is referred to as a virtual local area network, virtual LAN or VLAN.”
“A router (Layer 3 device) serves as the backbone for network traffic going across different VLANs.”

Which device would you select to partition a network into VLANs?

A.    repeater
B.    bridge
C.    switch
D.    router
E.    hub

Answer: C

On which two components of a router can a copy of a running-configuration file be saved manually by an engineer for backup purposes? (Choose two.)

B.    Flash
C.    ROM
D.    RAM
E.    DRAM

Answer: AB

Which VTP mode disallows the creation of local VLANs?

A.    transparent
B.    tunneling
C.    server
D.    client
E.    off
F.    native

Answer: D
“A VTP client behaves like a VTP server and transmits and receives VTP updates on its trunks, but you cannot create, change, or delete VLANs on a VTP client. VLANs are configured on another switch in the domain that is in server mode.” http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/c onfiguration/guide/swvtp.html#wp1205076

Which layer of the OSI model is associated with the reliable transmission of datagrams?

A.    Datagram
B.    Routing
C.    Network
D.    Data link
E.    Transport
F.    Transmission
G.    Session

Answer: E

Which three options describe routers compared to switches? (Choose three.)

A.    use IP address tables for information lookup
B.    concerned with packet forwarding
C.    operate at Layer 3 of the OSI model
D.    operate at Layer 2 of the OSI model
E.    use MAC address tables for information lookup
F.    concerned with the local delivery of frames

Answer: ABC

Which four statements indicate unique properties of VLAN 1 on Cisco Nexus switches? (Choose four.)

A.    VLAN 1 is used to flood multicast traffic.
B.    VLAN 1 cannot be deleted.
C.    VLAN 1 is used for Cisco Discovery Protocol.
D.    VLAN 1 is used for VTP advertisements.
E.    VLAN 1 defines a collision domain.
F.    VLAN 1 defines a broadcast domain.

Answer: BCDF

At which layer of the OSI model does TCP operate?

A.    1
B.    2
C.    3
D.    4
E.    5

Answer: D

Which two layers of the OSI model are combined in the Internet protocol suite network access layer? (Choose two.)

A.    1
B.    2
C.    3
D.    4
E.    5
F.    6
G.    7

Answer: AB

A switch is configured to be part of a VTP domain so that its VLAN database is not affected by any changes in the domain. Which mode should be configured on this switch?

A.    client
B.    transparent
C.    server
D.    neutral

Answer: B

What action does a switch take if the destination MAC address is unknown?

A.    Discard frame
B.    Send ICMP unreachable message to source
C.    Flood packet on all ports
D.    Compare destination IP address against an ACL to determine if it is permitted
E.    Send gratuitous ARP on all ports and wait for reply before forwarding

Answer: C
“What happens though when the switch receives a frame with a destination MAC address that is not included in the table? In that case the switch will just broadcast/flood the frame with the unknown destination address to all of its ports (apart from the port where the frame came from). This process is called unknown unicast flooding. ” http://telconotes.wordpress.com/2013/03/09/how-a-switch-works/

Lead2pass is a good website that provides all candidates with the latest IT certification exam materials. Lead2pass will provide you with the exam questions and verified answers that reflect the actual exam. The Cisco 200-150 exam dumps are developed by experienced IT professionals. 99.9% of hit rate. Guarantee you success in your 200-150 exam with our exam materials.

200-150 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDOUZOdUsxSGdTYmM

2017 Cisco 200-150 exam dumps (All 106 Q&As) from Lead2pass:

http://www.lead2pass.com/200-150.html [100% Exam Pass Guaranteed]

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back